Punches and Fullering

Sort By:  
MFC Drift Punch
MFC DRIFT PUNCH with RUBBER HANDLE (120116106MFC68827084-01)
This drift punch is made from H-13 steel welded to a mild steel handle from which we have forged a tang. Then, we encased the tang in a rubber handle.
FLATLAND FORGE FLATTER (120116106FLF70768482-01)
These Flatters are approx. 2lbs in weight. They are approx. 3" in height and working end is approx. 2 3/8" square.
JIM BLURTON HUNTER FULLER C HEAD (120116106JB70767682-CH01)
This fuller has a narrow curved blade and is ideal for fullering thicker materials, 10 and 12mm. The head is large and is an ideal tool for using with a striker. The blade is positioned under the centre of the tool to maximise the power of the hammer blow. The height of the fuller gives good visibility to the blade which is made from S1 tool steel. The handle is 16” long to keep the users hand away from the hot steel and is made from high quality hickory and grooved for grip. When purchased the head is not securely fastened to the handle. This allows the user to fit it for a left or right handed tool. The handle just needs to be driven in securely.
JIM BLURTON ROADSTER FULLER E HEAD (120116106JB70767682-EH01)
This fuller makes a wider crease than the Hunter and is perfect for 6 and 8mm material, where a wider groove is needed to take an E Head nail. This fuller is also very well suited to draft horse shoes. The head is large and is an ideal tool for using with a striker. The blade is positioned under the centre of the tool to maximise the power of the hammer blow. The height of the fuller gives good visibility to the blade which is made from S1 tool steel. The handle is 16” long to keep the users hand away from the hot steel and is made from high quality hickory and grooved for grip. When purchased the head is not securely fastened to the handle. This allows the user to fit it for a left or right handed tool. The handle just needs to be driven in securely.
JIM KEITH CREASER – DRAFT HEAD (103122123JK68827084-0A)
A superb tool for making the crease or fullering in a handmade horseshoe. Head is made of a hot working shock resistant tool steel. The 17" ash handle comes with two rubber disks (one is a spare) and mounting instructions so it can be for right or left handed use. This tool is long enough to keep the wooden handle away from the heat yet short enough to allow good vision of both the crease and the striking surface of the tool.
JIM KEITH CREASER – REGULAR HEAD (103122123JK82717682-0B)
A superb tool for making the crease or fullering in a handmade horseshoe. Head is approx. 3" X 7/8" X 7/8" and made of a hot working shock resistant tool steel. The 17" ash handle comes with two rubber disks (one is a spare) and mounting instructions so it can be for right or left handed use. This tool is long enough to keep the wooden handle away from the heat yet short enough to allow good vision of both the crease and the striking surface of the tool.
JIM KEITH CREASER – SLIM HEAD (103122123JK82717682-0C)
A superb tool for making the crease or fullering in a handmade horseshoe. Head is approx. 3" X 7/8" X 7/8" and made of a hot working shock resistant tool steel. The 17" ash handle comes with two rubber disks (one is a spare) and mounting instructions so it can be for right or left handed use. This tool is long enough to keep the wooden handle away from the heat yet short enough to allow good vision of both the crease and the striking surface of the tool.
JIM KEITH CREASER – WIDE HEAD (103122123JK82717682-0D)
A superb tool for making the crease or fullering in a handmade horseshoe. Head is approx. 3" X 7/8" X 7/8" and made of a hot working shock resistant tool steel. The 17" ash handle comes with two rubber disks (one is a spare) and mounting instructions so it can be for right or left handed use. This tool is long enough to keep the wooden handle away from the heat yet short enough to allow good vision of both the crease and the striking surface of the tool.
JIM KEITH CREASER – SHORTY HEAD (103122123JK82717682-0E)
A superb tool for making the crease or fullering in a handmade horseshoe. Head is approx. 3" X 7/8" X 7/8" and made of a hot working shock resistant tool steel. The 17" ash handle comes with two rubber disks (one is a spare) and mounting instructions so it can be for right or left handed use. This tool is long enough to keep the wooden handle away from the heat yet short enough to allow good vision of both the crease and the striking surface of the tool.
Per Page      1 - 14 of 14
  • 1